Dev VCI Electro Clean, Dev VCI Emitter Panel, Dev VCI Emitter

Description

Non-toxic solvent-based, anti-corrosive degreaser specially designed for electric and electronic items. Leaves no trace of fluids post drying.

Application

This product is recommended for:

  • Cleaning electric switch gears, conducting contacts, panels, PCBs.
  • Degreasing ferrous and non-ferrous parts.
  • Use in place of similar products.
  • Does not contain toxic solvents such as perchlorate and tetrachloride.

Properties

  • High degreasing power for geometrically complex parts.
  • Forms an almost imperceptible, thin, protective film, able to affix stabilizing crystals of anti-corrosive surfaces.
  • ADVANCED VCI molecular layer formation post degreasing stops flash rusting till preservation application.

Features & Benefits

  • Monomolecular forming technology that prevents the desorption of waste.
  • Di-electric solvent with quick drying.
  • High power to degrease parts with complex geometry without CFC content.
  • Ability to set auto-repairable protective coating which stabilizes anti-corrosive surfaces after degreasing.

Handling,Storage & Packaging

  • Dev VCI Electro Clean is a volatile solution. If in contact with eyes, wash with plenty of water.
  • Available in 300 ML aerosol spray cans.

Direction of use

  • Atomization, spray after the power is switched off.

Physical & Chemical Data

Type of film Monomolecular
Working Temperature Ambient
Colour Transparent
Flash Point Non-flammable after solvent evaporation
Appearance Liquid
Density at 20°C 1.240 g/cm³

Description

ADVANCED VCI vapor emitting sheets, for metal in electrical and electronic enclosure, also suitable for light fittings, terminal boxes, electric motors, packaging. Protection against the corrosion of ferrous and non-ferrous metal material in storage & shipment process.

Applications

  • This product is used for E&I items, closed electrical fittings & tanks where liquid or vapour VCI applications are difficult to apply.

Properties

  • Active VCI compound impregnated at 30-40% on neutral cellulose in the form of a sheet, commercialized by unit and each unit weighing an average 8 grams.
  • VCI ‘Volatile Corrosion Inhibitor’ used here is non-toxic. Toxicity: LD50 orally > 2000 mg/kg. Material is completely free of nitrites, nitrates, chromates, sulfates and heavy metals.
  • Additional comments: per Mil norm P3420-E
  • It is considered practically biodegradable (Rep.No. F.1.1 92/95 Bioplan) and (Rep. No. 47/96 Bioagri)

Features & Benefits

  • Dev VCI Emitter Panel is a biodegradable product and an excellent preservative for E&I items.

Directions for use

  • When power is disconnected, Place “Dev VCI Emitter Panel” inside the E&I item @ 8 pcs per M3 and close the panel airtight.
  • Close enclosure doors for good sealing.

Storage & Packaging

  • Keep away from harsh weather.
  • Available in the size: VCI 96x126 mm.
  • It is available in packs containing 30 pc each.

Physical & Chemical Data

Description

ADVANCED VCI vapor emitting sheets, for metal in electrical and electronic enclosure, also suitable for light fittings, terminal boxes, electric motors and, packaging. Protection against the corrosion of ferrous and non-ferrous metal material in storage & shipment processes.

Application

This product is recommended for:

  • This product is recommended for preservation of E&I items, closed electrical fittings & tanks where liquid or vapour VCI applications are difficult to apply.

Properties

  • Active VCI compound impregnated at 30-40% on neutral cellulose in the form of a sheet, commercialized by unit and each unit weighing an average 8 grams.
  • VCI ‘Volatile Corrosion Inhibitor’ used here is non-toxic. Toxicity: LD50 orally > 2000 mg/kg. Material is completely free of nitrites, nitrates, chromates, sulfates and heavy metals.
  • Additional comments: per Mil norm P3420-E
  • It is considered practically biodegradable (Rep.No. F.1.1 92/95 Bioplan) and (Rep. No. E.1.1.2 47/96 Bioagri).

Features & Benefits

  • Dev VCI Emitter is a biodegradable product and an excellent preservative for E&I items.

Storage & Packaging

  • Store away from heat, flame or sparks.
  • Available in different sizes: VCI 96x126mm 400x464 mm & 525x579 mm
  • Available in 1200 nos in a box.

Direction of use

  • Dev VCI Water Guard+ is used as an additive, 100% concentrated.
  • It is added as 2% of the volume of content.

Physical & Chemical Data

Subscribe
to our Newsletter